Mortty v5: CW and RTTY Keyer

Mortty v5 is a full-featured, inexpensive, hardware solution for precision CW and RTTY keying.

This tiny box measures only 1 inch high, 1.5 inches wide, and 2 inches long (25mm x 40mm x 50mm), but contains three printed circuit boards for CPU, Sidetone, and I/O (input / output). The front panel has a CW Speed control, an input jack for CW paddles, and six LEDs providing status of Radios 1 & 2 – PTT (push to talk, red LED) , CW Transmit (green LED) and RTTY Transmit (yellow LED). The rear panel has a USB-C jack to connect your logging program and two 3.5mm TRRS (Tip, Ring1, Ring2, Sleeve) jacks to connect two radios.

Mortty v5: CW and RTTY Keyer

Compare Mortty to the competition: Twice the Features, 1/2 the Price!

Front Panel

Displays the three LEDs (PTT, CW, RTTY) for Radios 1 and 2, the CW Speed control, and the input jack for the CW keyer paddle.

Interior View

Shows Mortty’s three printed circuit boards (top to bottom): CPU board, Sidetone and Speaker board, and I/O (Input Output) board.

Rear Panel

Displays three LEDs (power, CW mode, RTTY mode), CW/RTTY slide switch, sidetone volume control, and outputs to Radios 1 & 2.

Scroll to Top